A pull off tester is indispensable for the diagnosis of building structure damages as well as for checking complete renovation work. The Dyna pull off tester is used to determine the surface strength of concrete and other materials testing it directly on the component allowing the use of any measuring point. Additionally, the Dyna pull off tester can be used for the measuring of the adhesive strength of applied coatings such as plastic coatings, concrete coats, and mortars and plasters. The Dyna is a mobile pull off tester allowing the testing on any point of a structure without having to install test devices prior to the casting of concrete.
Features
- Integrated digital manometer (with metric and imperial units)
- Mobile for use in any location
- The pull off tester Dyna is lightweight and precise
- Independent of mains supply due to easy running crank drive
- Constant jerk-free load increase
- An optional electrical drive unit is available with the pull off tester
Application
- Measuring the adhesive strength of applied coatings e.g. plastic or concrete coatings, mortars, plasters, bituminous coats and coatings on metal
- Determining the surface strength of concrete and other materials
- Ideal for the evaluation of tensile strength in concrete renovation
Warranties
- Standard 2-year limited warranty on electronic parts
- Optional extended warranty periods up to 3 additional years
Product Variations
- Pull off tester Dyna Z series (for adhesion and tensile strength testing) with integrated digital manometer
- Pull off tester Dyna ZE series (for adhesion and tensile strength testing) with pressure sensor and electronic display device DYNAMETER which allows the easy data-transfer to a PC or printer for further analysis
- Optional electric drive EDm
- Pull off tester Dyna Estrich is an adhesive strength tester specially designed to measure the adhesive strength of floor coatings
Technical Data
| Dyna Z und Dyna ZE | ||||
| Dyna Z | Dyna ZE | |||
| Z16 | Z6 | Z16 | Z6 | |
| Tensile force | 16 kN (3'600 lbf) |
6 kN (1'350 lbf) |
16 kN (3'600 lbf) |
6 kN (1'350 lbf) |
| Resolution | 0.01 N/mm2 | |||
| Accuracy | < 2 % | < 1 % | ||
| Permissible stroke | 3.5 mm | 4.0 mm | 3.5 mm | 4.0 mm |
| Weight | 3.5 kg (7 lbs; 11 oz) | |||
| Battery | type CR 2430 for manometer for 150 h operation |
See below for display unit | ||
| Operating temperature | 0 ° to +60 °C (32 °F to 140 °F) | |||
| Storage temperature | -10 ° to +60 °C (14 °F to 140 °F) | |||
| Total weight | 6 kg (13 lbs; 3 oz) | 7.8 kg (17 lbs; 3 oz) | ||
| Dyna ZE - Dynameter display device | |
| Memory | non-volatile memory for 1'000 measured values |
| Display | graphic LCD display 128 x 128 pixel with backlight |
| Data output | RS 232 interface or with adapter to USB |
| Software | integrated software for the transmission of measured values to a printer or PC |
| Battery | six LR6 (AA), 1.5 V (60 h operation) |
| Weight | 1.8 kg (4 lbs) |
| Dyna Estrich | |
| Display | in N/mm2 based on dia. 50 mm test disc |
| Tensile force | max. 4400 N (990 lbf) |
| Tensile strength | 2.2 N/mm2 (320 psi) |
| Accuracy | < 3 % |
| Tensile stroke | 20 mm (0.79 in.) |
| Total weight | 2.8 kg (6 lbs; 3 oz) |
