STC "Expert"

Ultrasonic flaw detector УД2-70

Ultrasonic flaw detector УД2-70 is designed for testing of products for detecting of defects such as: discontinuity and homogeneity faults of materials, finished products and welded joints, as well as the depth and coordinates of defects and measurement of amplitudes from defects signal.

There are also special menus, which are used to detect the defects in parts and components of locomotives and wagons axes.

Compact ultrasonic flaw detector ПЕЛЕНГ-115

Compact ultrasonic flaw detector Пеленг-115 is designed for testing of products for detecting of defects such as disturbing the continuity and uniformity of materials and welded (soldered) joints, as well as to measure the depth and coordinates of the defects. The device can be used in all industries.

Flaw detector / Thickness indicator УДЗ -71 is designed for testing of products for detecting of defects such as disturbing the continuity and uniformity of materials, finished goods, intermediate goods and welded (soldered) joints.

Flaw Detector is designed for manual and mechanized ultrasonic testing of materials, products and equipment, producing and conservation of tomograms.

Ultrasonic indicator of concrete strength Бетон-70

Indicator of concrete strength Бетон – 70 (Сoncrete-70) is designed to measure the time of ultrasonic waves propagation in the building materials, for the determination of concrete strength in concrete products.
Application field - built and operated buildings, waterworks, buildings with difficult access to controlled areas, construction sites and enterprises of building industry.

Designed to measure the thickness of various products from metals and nonmetals, including products with access only from one side. The device can be used in all industries. By thickness detector ТУЗ-1 can be measured the thickness of pipes, pressure vessels, boilers and other facilities, including the extent of corrosion and erosion wear by the residual thickness method.

Ultrasonic Thickness indicator ТУЗ-2

Designed to measure the thickness of various products from metals and nonmetals, including products with access only from one side. The device can be used in all industries. By thickness detector ТУЗ-2 can be measured the thickness of pipes, pressure vessels, boilers and other facilities, including the extent of corrosion and erosion wear by the residual thickness method.

Compact ultrasonic thickness indicator ТУЗ-3 is designed to measure the thickness of various products from metals and nonmetals, including products with access only from one side. The device can be used in all industries. By thickness detector ТУЗ-3 can be measured the thickness of pipes, pressure vessels, boilers and other facilities, including the extent of corrosion and erosion wear by the residual thickness method. There are two modifications: ТУЗ-3-5 and ТУЗ-3-10 with built-in transducers, respectively - 5 and 10 MHz.

Designed to measure the thickness of steel products by echo-pulse method.

Designed to measure the thickness of products by echo-pulse method.

Ultrasonic thickness indicator УТ -82 (for polyethylene) is used to measure the thickness of polyethylene products (including the thickness of polyethylene pipes). Indicator equipped with communication interfaces to input the results of measurements on the PC.

The device is designed for monitoring underwater steel objects (standard length of cable 20m), including the thickness of ships hulls, and offshore facilities, as well as the thickness of the steel elements of hydroelectric installations, pipelines, etc. Indicator can be equipped with cable 50m or 100m.

- Signal/noise ratio in the control zone at least 16 dB;

- Working temperature range from -30 to + 55 ° C;

- Signal/noise ratio in the control zone at least 16 dB;

- Working temperature range from -10 to + 50 ° C;

Contact angle with single crystal transducers for detection of small diameter pipes